Publicidad
Idiomas disponibles
Idiomas disponibles
ADDITIONAL SAFETY
INFORMATION FOR DRILL
a.
Secure the workpiece. A workpiece
clamped with clamping devices or in a vice
is held more securely than by hand.
b.
Always wait until the power tool has come
to a complete stop before placing it down.
The application tool can jam and cause you
to lose control of the power tool.
c.
Switch the power tool off immediately if
the application tool becomes blocked.
Be prepared for high torque reactions
which cause kickback. The application
tool becomes blocked when it becomes
jammed in the workpiece or when the
power tool becomes overloaded.
d.
Use suitable detectors to determine if
there are hidden supply lines or contact
the local utility company for assistance.
Contact with electric cables can cause fire
and electric shock. Damaging gas lines can
lead to explosion. Breaking water pipes
causes property damage.
e.
Hold the power tool securely. When
tightening and loosening screws be
prepared for temporarily high torque
reactions.
f.
In case of damage and improper use of
the battery, vapours may be emitted. The
battery can set alight or explode. Ensure
the area is well ventilated and seek medical
attention should you experience any
adverse effects. The vapours may irritate
the respiratory system.
g.
Do not open the battery. There is a risk of
short-circuiting.
h.
The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short
circuit may occur, causing the battery to
burn, smoke, explode or overheat.
i.
Only use the battery with products from
the manufacturer. This is the only way in
which you can protect the battery against
dangerous overload.
SAFETY WARNING FOR
BATTERY PACK AND
BATTERY CHARGER
•
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
WWW.SENIXTOOLS.COM
create a risk of fire when used with another
battery pack.
•
Use appliances only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
WARNING!
Use only with SENIX X2 batteries: B20X2 /
B25X2 / B40X2 / B50X2.
•
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
•
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from
the battery may cause irritation or burns.
(This advice is considered correct for
conventional NiMh, NiCd, lead acid and
lithium-ion cell types. If this advice is
incorrect for a cell design that differs from
these, then the correct advice may be
substituted.)
•
Do not use a battery pack or appliance
that is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
•
Do not expose a battery pack or appliance
to fire or excessive temperature. Exposure
to fire or temperature above 266°F(130°C)
may cause explosion.
•
Follow all charging instructions and do
not charge the battery pack or appliance
outside of the temperature range specified
in the instructions. Charging improperly or
at temperatures outside of the specified
range may damage the battery and
increase the risk of fire.
•
Do not modify or attempt to repair
the appliance or the battery pack (as
applicable) except as indicated in the
instructions for use and care.
VIBRATION + NOISE
REDUCTION
5 - EN
Publicidad
