2. Install the rear wheels
First, remove the nut and gasket from the rear axle, then install the wheel, gasket and
nut onto the rear axle in turn, tighten the nut with a wrench, and finally install the wheel
cover on the wheel. Install the rear wheel on the other side in the same way.
3. Install the steering wheel
First remove the screw and nut from steering rod, connect the steering wheel cable to
the instrument panel, align the center hole at the bottom of the steering wheel with the
steering rod and insert it, finally lock the steering wheel and steering rod with the screw
and nut.
4. Install the doors
First, remove the screws on the body, align the left and right doors with the lower
holes, and then fix them with screws.
5