VR EQUIPMENT VREQH2 Manual De Uso página 11

3.2 Wearing the helmet
The OPEN FACE ALL MOUNTAIN HELMET model VREQH2
comes in different sizes in order to adapt to different head
circumferences. Choose the correct size by following the
instructions below:
The helmet is equipped with a magnetic quick-release buckle that
allows fastening and unfastening without changing the adjustment.
Before putting on the helmet, make sure that the straps are evenly
tightened and that they are properly engaged in the buckles.
With the chin strap open, place the helmet over your head.
Note which strap is loose, remove the helmet and tighten the loose
strap. Balance the length of all four straps.
Fasten the chin strap with the magnetic clasp.
The helmet must be positioned straight, firmly and level on the head
so that it covers the forehead without obstructing the view.
RIGHT
Adjust the chin strap so that it adheres to the lower part of the jaw
without pulling. To check the correct tension, open your mouth, and
you should feel the strap pull against your chin.
Adjust the helmet at the back using the adjustment system, as
described in paragraph 3.3.
12
Size
S
M
L
Head circumference
54-56 cm
57-58 cm
59-61 cm
WRONG WRONG