Descargar Imprimir esta página

EAS ELECTRIC EHH210 Manual De Instrucciones página 27

Ocultar thumbs Ver también para EHH210:

Publicidad

Idiomas disponibles

Idiomas disponibles

Warning:
the heater off if it overheats due to abnormal conditions. lf
this occurs, turn the heater off, unplug it, and inspect and
remove any objects on or adjacent to the heater. Allow it to
cool for a few minutes, and then plug it back in and resume
normal operation.
TROUBLESHOOTING
lf your heater fails to operate, please follow these instructions:
Ensure that your circuit breaker or fuse is working properly.
Be sure the heater is plugged in and that the electrical outlet is working
properly.
Check for any obstruction. lf you find any obstruction, turn the heater
"OFF". Unplug the heater and wait a few minutes for it to cool down.
Carefully remove the obstruction. Plug the heater in and turn it on again
by referring to the instructions.
CLEANING AND STORAGE
Warning:
cleaning the unit
Use a soft dry cloth to clean the surface of the product Wipe dry with a
clean cloth.
Use warm water with a mild detergent and a soft damp cloth to clean
the product. Wipe dry with a clean cloth. Do not pour water onto or into
the unit.
To store your product in the off-season, we recommend using the original (or
appropriately sized) box. lt is important to keep it in a safe, dry location.
Remote controller
Battery
--
+
ij ij
,Ir.
This heater includes a thermal cut-off that shuts
Always disconnect the mains power supply before
12
Battery cover
íl
+
V.2

Publicidad

loading