Armor All AA255W Manual Del Usuario página 14

INSTALLING & CLEANING REUSABLE
1
INSTALLING REUSABLE CLOTH FILTER
1. Verify that the power cord is disconnected from the outlet (Fig.1).
2. Remove the powerhead and place in an upside-down position.
3. Install the reusable cloth filter over the filter cage making sure the cage is completely covered
(Fig. 2 & 3).
4. Place the powerhead onto the collection tank.
REMOVING & CLEANING REUSABLE CLOTH FILTER
1. With the removed powerhead in an upside-down position, carefully remove the reusable cloth filter
from the filter cage (Fig. 4).
2. Clean the reusable cloth filter by gently tapping or brushing dirt off. Cleaning should not be done
indoors in living areas. For optimal performance, a new filter is recommended.
3. Use a mild soap and water solution to wash the reusable cloth filter and rinse with clean water
(Fig. 5).
4. Allow the wet filter to air dry completely before storing or installing onto the filter cage.
CLOTH FILTER
2 3
14
4 5