PAG 8
INTRODUCTION.
With ACTV005 Remote control Extension System you will be able to control (from any TV-SET of the house) any infrared
equipment connected to another TV-SET (Digital or analog Satellite Receivers, VCR, CATV, HIFI, etc).
PANEL CONTROLS AND FEATURES OF UNIVERSAL TYPE.
RECEPTOR (RECEPTION)
Toma de
antena
Lámpara
SETTING UP.
For the correct location of the reemitter led over the equipment to be controlled (fig 1), it is convenient to interconnect reemit-
ter and receiver according to "D", locating the receiver led "B" in a box in front of the remote controls. Before connecting
ACTV005 power supplies to 120V, make sure that (from inside the box) the controls don,t operate the equipment "E".
You can now plug the power supplies and optimize the position of the reemitter Led "A" over the equipment "E" (opera-
ting remote controls at the same time).
Keep in mind that the infrared leds emit and receive by the opposed part to the entrance of cable (see "fig. 1-C").
LED Receptor
Control
Alimentación
EMISOR (REEMITTER)
Toma de
antena
Lámpara
fig. 1
LED Receptor
Alimentación