Publicidad
Idiomas disponibles
Idiomas disponibles
Alarm state: When the siren is in this state, the audible and visual alarm
starts (the red LED flashes often). If it is not turned off by the user
manually, the siren will go out of alarm automatically after 3 minutes and
will return to the standby state.
c. Daily operation
Remote controll is one kind of device which can carry out multi-function
operation paired with this siren. Its function is convenient for user to
control its state when he is at the door (outdoor) or long-distance, such
as out arm, home arm, emergency alarm , the instant disarm functions
etc.
Out arm: press [ Arm ] key, it will be in arm alert state at once.
Disarm: press [ Disarm ] key, it will be in disarm standby state at once.
Home arm: press [ Home Arm ] key, it will be in the home arm alert state
at once.
Emergency alarm: press [ Emergency ] key, it will be an emergency
trigger, send to siren, and an instant alarm.
4. MAINTENANCE
a. System testing
Although the siren alarm system is used every day, it still needs regular
care, maintenance and inspection, to ensure that the alarm system will
be stable, reliable and safe. Normally the standalone siren alarm needs
a thorough inspection every 3 months and the detectors need to be
checked once a month.
B. Siren alarm host detection
Whether the alarm host can be armed and disarmed normally or not.
Whether the host can receive signal normally or not, as well as the back-
up battery is OK or not.
C. Detector detection
Manually trigger the detector to check whether it alarms normally or not.
Check batteries of all detectors to check whether they are under-voltage
or not.
User manual
6
Publicidad
