Klarstein WONDERWALL 10045467 Manual Del Usuario página 18

EN
18
WALL INSTALLATION
Remove the 4 metal wall brackets and
4 metal wall bracket screws from the
bracket and attach these brackets to
the back of the unit.
Mark the positions of the four holes to
be drilled on the wall and use a drill to
drill the holes. Make sure the distance
between each hole matches the round
hole on the brackets on the back of
the heater.
Insert the plastic dowels into the
holes.
Insert the metal screws into the
dowels.
Lift the heater, align the four round
holes on the brackets on the back of
the heater with the four screws on
the wall, and slide the screw from
position A to position B by moving
the heater slightly.