Buffalo CD561 Manual De Instrucciones página 4

UK
Installation
Position mixer on level and stable surface
Layout of Controls
0 = Off
I = Low Speed
II = High Speed
Operation
1. Place the drink ingredients into the mixing jug, ensuring that the maximum fill line is not exceeded.
2. Select desired speed setting using the switch located at the top of the mixer
3. Position mixing jug into holder
4. If switch is set to position I or Position II mixer will start automatically. If switch set to position 0
select either speed I or II to start mixing.
Note: Mixer will not work unless mixing jug is correctly located in holder and switch is set to
position I or II
5. When drink has been completely mixed, mixer can be stopped by either setting switch to position 0 or
by removing cup from the holder
4