Cleaning, Care & Maintenance; Troubleshooting; Technical Specifications - Buffalo CD561 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)
Replacing the agitator
1. Turn off the mixer and disconnect from the power supply.
2. To remove agitator unscrew counter clockwise.
3. To replace agitator screw clockwise.
Cleaning, Care & Maintenance
Always turn off the mixer and disconnect from the power supply before cleaning
Use warm soapy water to clean the bowl, and agitator. Do not use abrasive cleaning chemicals as these
can leave harmful residues
Clean the exterior of the appliance with a damp cloth
Dry all parts thoroughly after cleaning
Do not use jet/pressure washers to clean the appliance
Clean the appliance regularly
Trouble Shooting
Trouble
The machine does not start

Technical Specifications

Model Voltage
CD561 230V 50hz
Cause
1. No power supply to mixer
2. The mixing jug is not correctly located
in the jug holder
3. The switch is in position "0"
Power Current
400w 1.8a
1. Check the main switch, the plug and
the wire.
2. Correctly position the jug.
3. Press the switch into position I or II
Dimensions Weight
h x w x d mm
500 x 158 x 208 6.5kg
UK
Solution
Jug Volume
0.95L
5