Publicidad
Idiomas disponibles
Idiomas disponibles
5459520-Elektrotac-man_a 08.11.10 12:28 Seite 47
in order to compare one electrical tool
with another.
The specified vibration emission value
can also be used for an introductory
evaluation of the influence.
CAUTION! The vibration
emission value may fluctuate
from the specified value during use of
the power tool. These fluctuations will
depend on the way in which the
power tool is used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the influence
must be made whilst taking account
of the actual conditions of use. (All
parts of the operating cycle must be
taken into account for this purpose.
This also includes times in which the
power tool is switched off and times
in which it is switched on, but is
running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out
noise-intensive work during permitted
times. Maintain the quiet periods and
limit your work to the absolute
minimum.
CAUTION! The effects of noise
may cause damage to the
hearing. Only ever work with suitable
ear defenders. Anybody else in the
vicinity should thus also wear ear
defenders.
3 – Components
1 On/Off switch
2 Contact switch
3 Trigger
4 Magazine
5 Magazine lock mechanism
6 Connection cable
7 Handle
8 Staple/nail ejection
4 – Correct use
This electric tacker is suitable for
tacking wood strips, wire mesh, bitumen
board, films, cardboard, shaped sealing
materials, decorative and covering
materials, etc. to wood and other
suitable materials with the specified
staples and tacks. All other applications
are expressly excluded.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have
been instructed by such a person with
regard to how the unit is to be
operated. Children should be
supervised to ensure that they do not
play with the device.
The machine is intended only for use in
the household.
Improper use of the product
All applications carried out with the
device that are not listed in the
"Proper use" chapter will be considered
improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Just because you can affix an
accessory to your electrical tool, there is
no guarantee it is safe to use.
47
Publicidad
