Turn the thermostat to the desired temperature. The green light comes on, then goes out when the desired
EN
temperature is reached.
It is possible to activate 1, 2 or 3 resistors simultaneously.
Once the frying is done, hang the basket so that it drains.
Do not close the cover until the oil or fat has cooled.
When the temperature drops, the appliance starts heating again to maintain the oil at the desired temperature,
the temperature indicator light turns on automatically.
WARNING !
During intensive use, the oil can heat up and ignite, so remember to let the oil cool and change it
regularly to avoid this.
This fryer can tip over and cause injury if it is not fixed.
The device in operation can reach high temperatures. The outer sides and surface of the fryer may
be hot. The device must not be touched or moved during or immediately after use. Hands and face
must be protected from any splashes of grease.
At the end of use, set the temperature control knob to 0 ° C. Then unplug the device.
NOTE
The appliance is fitted with a safety system in the event of overheating. If triggered, unplug the device and
allow it to cool. If this protection system operates regularly, it is imperative to contact your dealer.
After automatic shutdown, the device can only be put into service by pressing the Reset button on the back
of the device, wait for the temperature to drop, press the Reset button.