ARDES AR4P06T Folleto De Instrucciones página 6

To turn the appliance on, insert the plug into the power socket and set the switch on
the back of the appliance to "I".
Press the ON/OFF button on the control panel. The appliance will start functioning
in the cold air mode.
1 - To select the cold air, hot air modes.
2 - To increase or decrease the power.
3 - To activate swinging.
4 - To activate programmed operation up to 3 hours.
The remote control can be used to activate the same functions present on the
appliance's control panel.
3
4
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
This appliance does not require any special maintenance.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from entering into
the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Battery Replacement.
In order to remove the cover of the battery seat, replace the battery with another
one featuring the same specifications, and replace the cap correctly.
If you do not intend to use the appliance for an extended period of time, remove
the batteries. If the batteries are leaking, be careful not to touch the acid which has
leaked out.
If you come into contact with the acid, wash your hands thoroughly.
Be careful that the acid does not come into contact with the eyes and that it is not
ingested.
Remove the batteries from the appliance before its disposal.
The batteries must be disposed of in the appropriate containers.
6
INSTRUcTIONS fOR USE
1
CONTROL
2
PANEL
MAINTENANcE
REMOTE
CONTROL