Assembly - Gardenline BL180 Manual Del Usuario

Cordless Trimmer · 18V Lithium-ion Battery

Assembly

Assembly
WARNING: To avoid injury and to reduce the risk of electrical shock or fire:
Replace the battery pack or charger immediately if the battery case or charger cord is damaged.
Always make sure the string trimmer switch is OFF before inserting or removing the battery pack.
Always make sure the battery pack is removed and the switch is OFF, before assembling, inspect-
ing, adjusting, or maintaining any other part of the string trimmer.
Read, understand, and follow the Battery Charger instructions.
1. Unpacking
Carefully remove the machine and accessories from the box. Make sure that all items listed on
previous page are included. Inspect the machine carefully to make sure no breakage or damage
occurred during shipping. Keep the packing material until you have carefully inspected and sat-
isfactorily operated the machine.
2. Charge the battery (Fig2)
WARNING: Never attempt to open the battery pack for any reason. If battery pack case is cracked
or damaged, do not insert into charger. Do not crush, drop or damage battery pack.
Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or
damaged in any way (i.e., pierced with a nail, hit with a hammer or stepped on). Damaged bat-
tery packs should be returned to service center for recycling.
WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed
battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit
boxes, drawers, etc.; with loose nails, screws, keys, etc.
Use the charger in normal room temperature whenever possible. To prevent overheating, do not
cover the charger and do not charge battery pack in direct sunlight or near heat sources.
Always unplug the charger from the power supply when there is no battery pack inserted.
-Insert the cord plug into an appropriate AC power outlet. The green LED light comes on indicat-
ing the adapter is ready for use.
-Connect the plug wire to the charger.
-Insert the battery pack into the charger, the green LED light will change to red to indicate
charge. The battery pack will only fit into the charger one way; do not force the battery pack. Be
sure that the battery pack is fully inserted into the charger.
-The battery pack will be fully charged after about 3 hours, and the red LED light will change to
green. Remove the cord plug from the power outlet and remove the battery pack.
10
AFTER SALE SUPPORT
1855 399 9415
support@sumec-na.com
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015