Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cordless Trimmer · 18V Lithium-ion Battery
Assembly
-The cord, charger and battery pack can be left connected with the green LED indefinitely. The
charger will keep the battery pack fresh and fully charged.
-The best storage place is one that is cool and dry away from direct sunlight and excess heat or
cold.
Note: The battery pack needs to be charged before first use and whenever it is unable to per-
form jobs with sufficient power that were easily done previously. Recharge discharged batteries
as soon as possible after use or battery life may be greatly diminished.
For best results, battery pack should be charged in a location where the temperature is between
41°F and 104°F (5°C to 40°C). Charging time will increase if the battery is charged in lower or
higher temperature than specified.
The adapter, charger and battery pack maybe become warm when charging which is a normal
condition.
B
A
C
Fig.2
3. Assemble the guard (Fig. 3 & 4)
WARNING: Remove the battery pack before attempting to attach the guard. Never operate the
tool without guard firmly in place. The guard must always be on the tool to protect the user
-Push the head rotation pedal to rotate the cutting head to vertical position, rotate the edge
guard forward to working position.
-Turn the trimmer upside down so that you are looking down at the spool cap.
-Turn the guard upside down and put it on the motor housing.
-Insert and tighten the screw provided to complete the guard assembly..
Fig.3
Fig.4
AFTER SALE SUPPORT
11
1855 399 9415
support@sumec-na.com
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Publicidad
Tabla de contenido
