Key Automation SUN Instrucciones Y Advertencias página 5

EN
tocells, as well as the removal of any leaves
or rocks that could hinder the automation.
To prevent anyone from activating the gate
or door, before proceeding, remember to re-
lease the automation and clean only with a
cloth slightly dampened with water.
• Disposal: At the end of the automation use-
ful life, make sure that the dismantling is car-
ried out by qualified personnel and the ma-
terials are recycled or disposed of according
to local regulations in force.
• Operate the gate or door (with remote con-
trol, key switch, etc..); if everything is work-
ing properly, the gate or the door will open
and close normally, otherwise the flashing
light flashes and the maneuver does not
start.
With the safeties out of use, the automation
must be repaired as soon as possible.
Replacing the remote control battery: if your
remote control seems to work worse or not
work at all after a while, this may simply de-
pend on the exhaustion of the battery (de-
pending on use, it may take several months
to over a year). In that case, you will see that
the confirmation of transmission light does
not turn on, or comes on only briefly.
The batteries contain polluting substances:
do not throw them in the garbage but use
the methods prescribed by local regulations.
Thank you for choosing key Automation; for
more information feel free to visit our website
www.keyautomation.it.
ATTENTION !
A more recent version of the manual sup-
plied may be available for download at
www.keyautomation.it; check for upda-
tes.
5