Roadstar RU-375BT Manual De Instrucciones página 7

English 3
BLUETOOTH OPERATION
Select "BT" mode by by pressing repeatedly the [MODE] knob (4);
Connect your Bluetooth portable device to the ID Bluetooth tagged as "RU-375BT";
You can now transfer the music to the RU-375BT.
Note: Music control (play, pause, etc) must be done from your external device.
ANSWER A PHONE CALL:
To Answer a phone call when your device is connected to the Speaker, press the
[ANSWER] button (3). To hang up the phone call press the [HANG UP] button (2).
USB OPERATION / TF OPERATION
Plug an USB stick into the [USB PORT] (8); or plug a micro SD (TF) card into the [TF
PORT] (9);
Playback will start automatically from the first track.
Next track: press [SKIP+] button (3)
Previous track: press [SKIP-] button (2)
Next 10 tracks: press [+10] button (17)
Previous 10 tracks: press [-10] button (16)
Next folder: long press [+10] button (17)
Previous folder: long press [-10] button (16)
Notes: Some mp3 player may not be able to play via the usb socket. this is not a
maul-function of the system.
To avoid damage to USB or TF memory, remove it only when the radio is turned off.
USB CHARGER
Plug an USB cable into the [USB CHARGER PORT] (11); Your device will be
charged.
REPEAT - RANDOM MODE
During playback, press repeatedly the [REPEAT] button (14) to select:
REP-ONE: The current track is played repeatedly.
REP-DIR: The current folder is played repeatedly.
REP-ALL: All tracks are played repeatedly.
Or press repeatedly the [RANDOM] button (15) to enable/disable random playback.
Or press [INT] button (13) to listen first 10 seconds for each track.
AUX-IN OPERATION
Select "AUX" mode by pressing repeatedly the [MODE] button (4);
Use one male to male 3.5mm jack cable (not included) to connect any external au-
dio device to the [AUX-IN SOCKET] (7).
Note: Music control (play, pause, etc) must be done from your external device.
FACTORY SETTINGS
To restore Factory settings, with small tip enter in hole [REST] (18) for 1 second.