Specifications; Parts And Accessories - YARD KING LT-200 Serie Manual Del Usuario

SPECIFICATIONS

ENGINE:
17.5 HP* Briggs & Stratton
Make Briggs & Stratton
Model Intek
Horsepower 17.5 @ 3600 rpm
Displacement 30.5 cu in. (500 cc)
Electrical System Alternator: 9 amp Reg.
Battery: 12 Volt, 230 CCA
Oil Capacity 48 oz (1,4 L)
CHASSIS:
Fuel Tank Capacity Capacity: 4.0 Gallons (15,1 L)
Rear Wheels Tire Size: 20 x 10 -8
Inflation Pressure: 10 psi (0,68 bar)
Front Wheels Tire Size: 15 x 6.0-6
Inflation Pressure: 12-14 psi (0,82-0,96 bar)
TRANSMISSION:
K46
Type Hydrostatic Tuff Torq K46
Hydraulic Fluid 10w 30 Premium Engine Oil
Speeds Forward: 0-5.5 MPH (0-8,9 km/h)
@ 3400 rpm Reverse: 0-3.0 MPH (0-4,8 km/h)
Continuous Torque 170 ft-lbs (230,5 Nm)
Output
Drawbar Rating 227 lbs (103 kg)
Maximum Weight 675 lbs (306 kg)
on Axle
Engine Power Rating Information
*Briggs & Stratton Models: The gross power rating for individual gas engine models is labeled in accordance with SAE (So-
ciety of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has
been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM;
horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which en-
gines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not de-
velop the rated gross power when used in a given piece of power equipment (actual "on-site" or net horsepower). This
difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, car-
buretor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-
to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher
rated power for this Series engine.

PARTS AND ACCESSORIES

Replacement Parts
Replacement parts are available from an authorized
dealer.
26
MOWER:
Width of Cut 46" (117 cm)
Number of Blades 3
Base Deck Platform Side Discharge
Cutting Height 1.0 - 4.0 in. (2,5 - 10,2 cm)
Cutting Positions Infinite
DIMENSIONS:
Overall Length
Overall Width (w/o deflector)
Overall Width (with deflector)
Height
Accessories
See an authorized dealer for a list of the available acces-
sories.
71" (180 cm)
48" (122 cm)
57" (145 cm)
44" (112 cm)
www.murray.com