Livoo BP 61071 Manual De Instrucciones página 6

appliance and understand the hazards involved. Children must not play with the
appliance. Cleaning and maintenance by the user should not be performed by
unsupervised children.
16. This device contains batteries that cannot be replaced.
Technical Specifications
Input voltage: 100-230V
Output: 5 V 1000 mA
Battery: 2000mAh
Drawing of the device
Figure 1
1 Pulse button
2 Lamp
3 Turn right turn left and shut down button
4 Nail sharpener grinding wheel
Cleaning and maintenance
Clean your pet claw file regularly.
Regular maintenance of your refillable file will extend the life of your equipment.
After each use:
Make sure the file is turned off.
Clean the product with a cloth slightly dampened with water.
Do not use abrasive cleaners on the unit.
Do not immerse the file in water.
Cleaning the sharpener :
You can remove the cover of the sharpener by turning it. You can then remove the cover for easy
cleaning.
The sharpener can be cleaned with a fine cleaning brush or cloth, not included.
Brush thoroughly and blow if necessary to remove residue.
Use of the device
Charging the unit:
Fully charge the unit before use.
Insert the USB cable into the USB port (Figure 1 n*6).
Connect the USB cable to another device that can charge your claw file.
Carefully observe the maximum charging voltage indicated on the device (5V) to avoid damage to the
device.
The red charge indicator will light up and it will take 4 hours to charge the device.
Use:
Use your device only on dry and clean nails.
To start filing, slide the ON/OFF button up. You can choose between two directions of rotation. The LED
light below the file lights up when the file is rotating.
When you are finished filing, slide the ON/OFF button down and the unit will stop.
You have the option of using the LED light alone, by pushing the ON/OFF button 3 times.
To use the PUSH mode, set the button to LED light mode and press the PUSH button at the same time.
www.livoo.fr
5 Charging indicator
6 USB port
7 Lid
8 USB cable