ASROCK H55M-LE Manual Del Usuario página 17

Idiomas disponibles

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

Serial ATAII Connectors

(SATAII_1: see p.2, No. 11)

(SATAII_2: see p.2, No. 10)

(SATAII_3: see p.2, No. 12)

(SATAII_4: see p.2, No. 13)

Serial ATA (SATA)

Data Cable

(Optional)

USB 2.0 Headers

(9-pin USB8_9)

(see p.2 No. 20)

(9-pin USB6_7)

(see p.2 No. 18)

Print Port Header

(25-pin LPT1)

(see p.2 No. 23)

ASRock H55M-LE Motherboard

These four Serial ATAII (SATAII)

connectors support SATA data

cables for internal storage

devices. The current SATAII

interface allows up to 3.0 Gb/s

data transfer rate.

Either end of the SATA data cable

can be connected to the SATA /

SATAII hard disk or the SATAII

connector on this motherboard.

Besides six default USB 2.0

ports on the I/O panel, there are

two USB 2.0 headers on this

motherboard. Each USB 2.0

header can support two USB

2.0 ports.

This is an interface for print

port cable that allows

convenient connection of printer

devices.