marposs TESTAR Quick read M Manual De Instalacion Y Uso página 195

Request from Host
Response from QuickRead
Programming of the Metric Measuring Unit.
QuickRead functions by means of the metric unit.
In case of error QuickRead returns the string ERR3
in
Request from Host
Response from QuickRead
Programming of the Imperial Measuring Unit.
QuickRead functions by means of the imperial unit.
In case of error QuickRead returns the string ERR3
M?
Request from Host
Response from QuickRead
Request of the Measuring Value.
QuickRead returns the formatted measuring string xxxxxxxx ( see chapter 9 "Formatting of
numerical string", page 202).
In case of overrange of the measure, QuickRead returns the string O
In case the measure is not zeroed, QuickRead returns the string N
In case the measure can not be transmitted, QuickRead returns the string I
Example : Request of the measure value on QuickRead with selected metric system, high
resolution and measure = +00.1341
Request from Host
Response from QuickRead
Example : Request of the measure value on QuickRead with selected metric system, high
resolution and measure = -00.0282
Request from Host
Response from QuickRead
S?
Request from Host
Response from QuickRead
Request of the Measure Status.
If the measure is available, QuickRead returns one of the following string:

< measure lower than the lower tolerance limit.

> measure greater than the upper tolerance limit.

@ measure within the tolerance limit.

X measure tolerance limits not available.
In case of overrange of the measure, QuickRead returns the string O
In case the measure is not zeroed, QuickRead returns the string N
ASCII SERIAL TRANSMISSION PROTOCOL
mm
mm
 .
 .
M?
xxxxxxxx
M?
+00.1341
M?
-00.0282
S?
xxxxxxxx



in

in


.
.
.






.
.
195