Publicidad
Idiomas disponibles
Idiomas disponibles
To trim hair just above the skin surface, remove
the comb attachment
and guide the blade
9
1
directly over the skin in the desired area.
Note: To trim only individual hairs, adjust the
angle of the blade
and guide this against
1
the individual hairs.
Cleaning, care and storage
Note: Always switch off the product before cleaning it.
Do not use any corrosive or abrasive cleaning
agents. This might damage the surface of the
product.
Clean the housing with a dry cloth.
Take off the comb attachment
(see Fig. C)
9
and clean the blade
carefully under the run-
1
ning water (see Fig. D). Then fully dry the blade
before using the product again.
1
Attention: The product is only protected against
from splash water. Never immerse it in the water.
Otherwise, irreparable damage may results.
If there are still hair on the blade
, clean it with
1
the double-sided cleaning brush
(see Fig. D).
12
To store the product, always put on the protec-
tive cap
.
10
Keep the product in a cool, dry location.
38 GB/IE
Publicidad
