Sage Citrus Press Pro SCP800 Guia Del Usuario página 8

Troubleshooting
POSSIBLE EASY SOLUTION
PROBLEM
Will not
• Switch not in the ON position.
work
• Juice press arm not lowered.
• Juicing cone or fruit dome not
assembled properly.
• Filter not assembled properly.
• Motor overload protection
may have operated (see
below).
Motor
• The juicer is fitted with an
Overload
overload protector to prevent
Protection
damage to the Motor.
If the Motor suddenly stops
working after heavy or long
periods of use, turn OFF
at the ON/OFF button, unplug
from the wall and allow the
unit to cool for 15 minutes.
Once the unit is cooled you
will be able to use the juicer
again as normal.
NOTE: The unit MUST be
unplugged from the supply
to allow the protector to reset.
• Despite this overload
protector we suggest juicing
in smaller batches in order
to protect the Motor.
8