Descargar Imprimir esta página

Danby DIM2500SSDB Manual Del Propietário página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
This appliance is not recommended for use with sockets or main switches with the A/GFCI function, as it
may cause false tripping.
Careful handling, moving, and use of the icemaker to avoid either damaging the refrigerant tubing, or
increasing the risk of a leak.
All component parts shall be replaced with like components and that servicing shall be done by factory
authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or
improper service.
The ice maker is to be installed in accordance with the Safety Standard for Refrigeration Systems, ASHRAE
15. The ice maker shall not be installed in corridors or hallways of public buildings.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape
wire for the electrical current.
This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged
into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a
properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the
appliance is designed for.
WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified
electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as
to whether the appliance is properly grounded.
Do not connect your appliance to extension cords or together with another appliance in the same wall
outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong
from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar
qualified person in order to avoid hazard.
SAVE THESE INSTRUCTIONS!

Publicidad

loading

Este manual también es adecuado para:

Dim2500rdb