Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
PREPARATION
1. Remove and discard all packaging.
2. Place the ice maker in a suitable position.
3. Clean the ice maker and run the self-clean mode before using the ice maker for the first time.
CONTROL PANEL
1. Full bucket indicator: Illuminates when the bucket is full of ice.
2. Low water indicator: Illuminates when the water level is too low to make more ice.
3. Power indicator: Illuminates when the ice maker is running.
4. Power button: Press to begin making ice.
3
4
2
1
MAKING ICE
1. Pour clean water into the water tank to the "Max
Fill Line".
2. You must only use potable water to make ice.
3. Press the power button to begin making ice.
Note: The ice maker only makes ice, it does not
store ice. Ice left in the bucket will melt over time.
Move excess ice to a freezer for long term storage.
Make sure that all water is drained from the ice
maker when you are finished making ice. Do not
allow water to sit inside the ice maker longer than
12 hours.
4
Publicidad
