Duronic DH06 Manual De Instrucciones página 8

1. Plug the power cable into the mains socket and switch on.
2. Slide the water tank into the dehumidifier, ensuring it has clicked firmly into
place.
3. To turn on the dehumidifier, press the power button. The appliance will beep
once.
4. To turn off the dehumidifier, press the power button again.
Overflow Protection:
1. When the water tank is full, the dehumidifier will automatically turn off.
2. Empty and replace the water tank according to the instructions below.
3. Restart the dehumidifier and use as normal.
Emptying the Water Tank:
1. Press the power button to turn off the dehumidifier and leave it to stand for a
1-2 minutes to allow the final drips of water to drop into the tank.
2. Pull out the water tank from the back of the appliance.
3. Empty the water from the tank.
4. Dry the tank with a cloth and then place it back into the dehumidifier. Ensure
that it is pushed properly in place, it should click into place securely.
When not in use, always empty the water tank, clean and dry the
dehumidifier to prevent mould build up.
How to Use
8