JAROLIFT TDEF Serie Instrucciones Originales página 42

SETTINGS
UP and DOWN
Setting inching mode
In "inching mode" you can control blinds conveniently. When the UP button
is pressed, the curtain does not immediately move to the upper end position.
The motor is controlled by brief pressing and thus only opens the blind step
by step in order to open the slats. The function is also used for convenient con-
trol of roller shutters to open the ventilation slots.
Only when you keep the UP button pressed for longer than approx. 3 seconds is the
motor controlled in "press-and-release mode" and the curtain is fully opened.
Activating/deactivating inching mode
1. Stop the motor using the STOP button.
2. Press the UP and DOWN buttons on the transmitter at the same time.
3. Then press the STOP button 6x.
4. Press the DOWN button within 10 seconds.
The motor will confirm the activation (deactivation) of inching mode by vibrating
briefly.
UP and DOWN
42
6 x STOP
6 x STOP DOWN
UP