Publicidad
Idiomas disponibles
Idiomas disponibles
Using your SC2 Digital Pedometer
Understanding the sequence of screens to view your recorded Activity Data
«
Press the white
MODE
•
Clock
•
Steps
•
Distance (Miles or Km)
•
Calories Burned
•
Speed (MPH or KPH)
•
Activity Timer
•
Memory Log
Where to place your pedometer
Your SC2 Pedometer can be placed anywhere on your person.
•
Clip it on the front of your pants in line with your knee;
•
Place it in your pocket or purse;
•
Hang from a strap around your neck (strap not included)
False Start Monitor
Prevents counting phantom steps. It starts to count after 15 consecutive steps. Beginning the count at 16
onward. We recommend walking at 20 steps before checking. The longer you walk the more accurate it will get
as it adjusts to your walking style.
Sleep Mode
The SC2 Pedometer goes into hibernation mode after about 3 minutes of inactivity. The screen will remain on,
but it won't use any more power than a digital watch. As soon as it detects activity it will resume tracking.
We have included a high quality battery which normally lasts from 8 months to a year depending on usage.
Spare batteries are available and inexpensive. The battery is a 3V CR2032 button cell.
Using the 7 Day Memory Log
»
1. Press
«MODE
until Day is in top right corner
»
2. Press
«RESET
to cycle back the days
»
3. Press
«SET
to view Steps, Miles, Calories, Speed and Timer for the given day
Changing the battery
The SC2 Pedometer takes a 3V CR2032 button cell.
2. Remove the screw on the battery cover below the clip with a small Phillips screwdriver
3. Remove the battery cover
4. Remove the old battery and replace it with the new one
Watch battery changing video:
»
button to navigate between screens.
www.ozofitness.com/SC2-battery
5
Publicidad
