Introduction - Parkside PADM 1250 A1 Traduccion Del Manual De Instrucciones Originale

Content
Introduction ............................... 23
Proper use ................................. 24
General description .................... 24
Scope of delivery ............................24
Description of functions ....................24
Overview .......................................24
Technical data ............................ 25
Safety information ..................... 25
Graphical symbols ..........................25
General safety instructions................26
General Safety Instructions
for Power Tools ...............................26
Safety information
for surface planers and thicknessers ..28
Safety equipment ............................29
Residual risks ..................................29
Fixed installation ....................... 29
Commissioning
the surface planer ...................... 29
Mounting the rip fence .....................29
Attaching the crank handle ...............30
Mounting the chip extractor ..............30
Commissioning the thicknesser ... 30
Mounting the chip extractor ..............30
Checks before
putting into operation ................ 31
Checking the switch and blade brake ..31
Checking the anti-kickback claws ......31
General working instructions ..... 31
Application and storage
of the push stick ..............................31
Working instructions
for surface planers ..........................32
Working instructions for thicknessers ..32
Switching on/off ........................ 32
Overload protection ........................32
Operating the surface planer ..... 32
Adjusting the rip fence .....................32
Adjusting the planer blade cover ......32
Setting the cutting depth ...................32
Operating the thicknesser .......... 33
Setting the cutting depth ...................33
Replacing and aligning
the blades .................................. 33
Cleaning and servicing ............... 33
Cleaning ........................................34
Maintenance ..................................34
Storage ...................................... 34
Transport ................................... 34
Disposal/
environmental protection ........... 34
Guarantee ................................. 35
Repair Service ............................ 36
Service-Center ............................ 36
Importer .................................... 36
Spare parts/accessories ............. 36
Troubleshooting ......................... 37
Translation of the original
EC declaration of conformity .... 279
Exploded Drawing ................... 295

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a final inspection. The
functionality of your equipment is there-
fore guaranteed. In some cases, residual
amounts of lubricants may be present on or
in the device. This is not a flaw or a defect
and is no cause for concern.
The operating instructions constitute
part of this product. They contain im-
portant information on safety, use and dis-
posal. Before using the product, familiarise
yourself with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
GB MT
23