Cavist 12 Manual De Usuario página 7

OPERATION OF WINE COOLER
1. This is a dual zone wine cooler; the upper zone is for storage of white wine with temperature from
7℃ to 18℃, the lower zone is for storage of red wine with temperature range from 7℃ to 18℃.
2. When you are setting the temperature control, as you desire
on the control panel. The temperature that you desire to set will increase 1ºF or 1ºC if you push the
button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
button once.
3. The Light can be turned OFF or ON by touching the "Light button
4. When you push the
default setting ( upper zone 7ºC / 45ºF, and lower zone 12ºC / 54ºF).
5. The TEMP-ADJ button is set on one certain point when the cellar is off the assembling line. When
you want to change the temperature in the cabinet, please select the right zone and change
accordingly.
PARTICULAR PRECAUTIONS
Ø In order to function at its highest potential, this wine cooler needs to be placed on flat floor, with
2cm spaces at each side and 10cm space at the backside.
Ø Use the adjustable iron case to place the cellar fully horizontal.
Ø Avoid direct sunshine and high temperature.
Ø
Do not place heavy articles on the top of the cellar.
HANDLE INSTALLATION
To install the door handle follow the below steps:
1. Open the door of the appliance and move the door
gasket slightly to one side so that you can see two
designated holes for handle installation
2. Install the handle tightly as shown in the diagram
above with the two screws provided.
3. Ensure the door gasket falls back into place and that
the door opens and closes correctly.
MAINTENANCE
Ø Shut off power supply before cleaning cabinet.
Ø Take out wine and shelves, and then clean the cabinet
with soda water first and with clean water last.
Ø Do not use soap or detergent for the cabinet.
Ø Clean the cellar regularly.
or button for the first time, the LCD display will show the factory
by pushing the or button