Bosch 0 601 190 025 Manual Original página 14

OBJ_BUCH-117-003.book Page 13 Wednesday, June 9, 2010 11:31 AM
Product Features
The numbering of the illustrated product fea-
tures refers to the representation of the drill
stand on the graphics page.
1 Transport handle
2 Drilling column
3 Feed lock
4 Spirit level for vertical alignment
5 Spirit level for horizontal alignment
6 Upper locking handle on drill fixture
7 Lower locking handle on drill fixture
8 Drill fixture
9 Rack
10 Drill-hole centre indicator
11 Levelling screw
12 Supporting bracket
13 Knurled screw for supporting bracket
14 Hexagon screw for transport wheels
15 Transport wheels
16 Lock pin for feed feed handle
17 Feed handle
18 Handle (insulated gripping surface)
19 Angle scale
20 Lock button for drill-angle adjustment
21 Upper locking handle for drill-angle adjust-
ment
22 Lower locking handle for drill-angle adjust-
ment
23 Brickwork anchor*
24 Quick-clamping spindle*
25 Wing nut*
26 Sliding elements
27 Allen screws of the drill fixture
28 Adjusting screws of the drill fixture
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Drill stand for diamond drills
Article number
Dimensions
– Height
– Width
– Depth
– Length of drilling
column
Drill stroke, max.
Drilling diameter (max.)
in concrete with
– GDB 1600 WE**
– GDB 2500 WE***
Drilling diameter (max.)
in brickwork with
– GDB 1600 WE/DE**
– GDB 2500 WE***
Weight according to
EPTA-Procedure
01/2003
* with supporting angles mounted to the rear
** with suction head
*** also possible with water collection ring (accessory)
Please observe the article number on the type plate of
your drill stand. The trade names of individual drill
stands may vary.
Declaration of Conformity
We declare under our sole responsibility, that
the product described under "Technical data" is
in conformity with the provisions of the direc-
tive 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 22.04.2010
1 609 929 W61 | (9.6.10)
English | 13
S 500 A
Professional
0 601 190 025
mm 1010
mm 280
mm 465 (400*)
mm 1000
mm 500
mm 102
mm 212
mm 152
mm 152
kg 12.5