Before use
•Remove any packing material and loose parts from unit.
•Check the accessories before use. It should be fit with the machine and your
purpose.
•If the machine is new, the battery must first be charged.
•Battery is housed in the handle; it cannot be removed from handle.
Charging the battery
•The battery must be charged before first use.
•Only after several charge and discharge cycles will the battery attain full capacity.
•Plug the USB charger into a suitable USB source such as an existing mobile
phone USB charger or power bank and then connect to the screwdriver.
•The red light will illuminate.
•When charging is complete the red, yellow and green indicator light will all
extinguish.
•Charge the battery for 3 hours.
•Disconnect the charger from the mains power supply. If necessary use a
programmable timer socket and select a charging time of 3 hours if you are not
able to switch off the charging process manually at the required time.
WARNING: Overcharging the battery may reduce Its capacity and shorten its
life. Excessive overcharging may destroy the battery and/or charger.
NOTE: The product cannot be operated while charging!
E N G L IS H