Descargar Imprimir esta página

Edimax EDIM-0050 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
lmportante: Antes de encender el atornillador, asegúrese de que está correctamen-
•The screwdriver can be locked into 2 different angle settings. To do so, press the
te bloqueado en la posición de ángulo necesaria.
rotating handle button (4) and turning thehandla toth eright.Then nslease the
Indicador de capacidad de la batería
rotatinghandlebu*on(4).
-Pulsa el interruptor de encendido/apagado, la luz indicadora de energía (7) indica
lmportant:Before you switch on the screwdriver, make sure that it is correctly locked
el estado de la batería en 3 LEDs de colores.
in the angle position needed.
-LED rojo: La batería está vacía, recargue la batería.
Battery capacity indicator
-Amarillo y rojo: La batería tiene una carga restante adecuada.
•Press on/off switch, the power indicator light (7) indicates the power state of the
-Rojo y amarillo y verde: La batería está completamente cargada.
battery on 3 colored LEDs.
•Red LED: The battery is empty, recharge the battery.
•Yellow and red: The battery has an adequate remaining charge.
•Red & yellow & green: The battery is fully charged.
Important!
•Do not press the on/off switch when you change the screw bit to avoid unintentio-
nal starting of the machine.
•This product is fitted with a bit holder, the user may inset or remove the bits or
adaptor easily by hand.
•Only use tool bits which can be securely fastened in the chuck.
Screw driving
•To insert the screw-bit into the slot in the head of the screw, press the chuck first,
hold the screw bit perpendicular to the head of the screw, then release the chuck.
Important: Be sure to use bits that match the screw in shape and size.
CAUTION: If the battery is charged or discharged in the wrong way, the battery
capacity will be reduced very fast.
•Please always fully discharge the batteries before charging. Please always fully
charge the batteries in each charging.
•Ensure that the batteries are charged using the correct charger recommended by
the manufacturer.
ATTENTION! After a long time in storage the battery capacity may be
reduced.
E N GL IS H

Publicidad

loading