Connection To A Classic Line Coach System; Connection To A Professional Line Coach System - Blaupunkt TV Tuner 04 Instrucciones De Manejo

Connection to a Classic Line
Coach system
Audio/video
To integrate the TV tuner into your existing
Classic Line system, you need 2 audio ca-
bles (7 607 402 000) and 2 video cables
(7 607 263 001).
Connect the audio cable with the A/V
Output-Audio L/R outputs @ of the TV
tuner and the corresponding inputs of the
CCA (plug D, Pin8-10).
Connect the video cable with the A/V
Output-Video output ? of the TV tuner
and with the fi rst monitor in your Classic
Line system.
Cable remote control and
source selection
To be able to operate the TV tuner with the
CCA, you must install the following cables:
Cable set (7 607 006 418 / 419)
• to the 2.5-mm IR Remote jack socket
C.
Connect Pin1 of chamber A of your CCA
with the video remote connection of the
jack socket.
Connect Pin2 of chamber A of your CCA
with the earth connection of the jack sock-
et.
Insert the 2.5-mm jack socket into the
IR Remote socket C at the TV tuner.
Installation and connection
For the source selection, connect Pin4 of
the 6-pole REMOTE Molex socket A at the
TV tuner with the CAM-Out output at the
CCA (C2, Pin10).
6
3
Pin4: Source selection
Pin5: Earth
Pin6: Cable remote
Connection to a Professional
Line Coach system
Audio/cable remote control
To integrate the TV tuner into your exist-
ing Professional Line system, you need the
video remote cable (7 607 006 437).
Connect the video remote cable with the
A/V Output-Audio L/R outputs @ and
the 6-pole Remote Molex socket A at the
TV tuner and connect it to the X1500 CPA
socket of your Professional system.
Video
The video connection of the TV tuner re-
quires the video cable (7 607 263 001).
Connect the video cable with the
A/V Output-Video output ? of the TV
tuner and with the fi rst monitor in your
Professional system.
5 4
2 1
17