Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the TV tuner with
the IR remote control
Switching on/off
The TV tuner is switched on and off with the
Coach system by default.
If you operate the TV tuner without the
Coach system (Stand-alone),
u
you switch it on and off with the
POWER button 1 of the remote con-
trol.
OSD menu
The TV tuner is equipped with an OSD menu
(On-Screen Display) which displays differ-
ent setting functions on the monitor.
Antenna/cable network setting
You can adjust whether the TV tuner should
receive a terrestrial program via antenna or
whether it is connected to a TV cable net-
work.
To select the band,
u
press the BAND button 9.
The monitor displays the setting 1. TV or
2. CABLE. The fl ashing function is active.
To switch between the functions,
u
press the corresponding number but-
ton 1 or 2 < on the remote control.
u
Wait approx. 10 seconds until the set-
ting is stored.
Tuning into a station
There are different ways of tuning into a
station.
•
Using the station seek tuning or
•
using the Travelstore seek tuning.
Station seek tuning
For a channel seek tuning to the next receiv-
able station up or down in the band,
u
press the SEARCH CH
3.
The seek tuning starts and stops at the next
receivable station.
Travelstore seek tuning
With terrestrial reception, you can store up
to 70 stations and with cable reception up
to 56 stations.
To start a Travelstore seek tuning,
u
press the TRAVEL STORE button 6.
The monitor displays:
1. AUTO DETECT SYSTEM
2. L SYSTEM: FRANCE
The AUTO DETECT SYSTEM is activated as
factory default. The number 1. fl ashes.
After approx. 10 seconds, the seek tuning
starts.
After the entire band has been scanned,
the Travelstore seek tuning stops at the fi rst
stored station.
If you want to perform a Travelstore seek
tuning in the SECAM band,
u
press button 2 < on the remote con-
trol.
The L SYSTEM: FRANCE is switched to ac-
tive.
Operation
or
button
19
Publicidad
Capítulos
Tabla de contenido
