Samsung DVD-P191 Manual Del Usuario página 21

CD-R MP3/WMA file
When you record MP3 or WMA files on CD-R, please refer
to the following.
- Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are compatible
with Microsoft's DOS and Windows, and with Apple's Mac.
This format is the most widely used.
- When naming your MP3 or WMA files, do not exceed 8
characters, and enter ".mp3, .wma" as the file extension.
General name format : Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD audio
sound requires an analog/digital sampling rate, that is conver
sion to MP3 format, of at least 128 Kbps and up to 160 Kbps.
However, choosing higher rates, like 192 Kbps or more, only
rarely give better sound quality. Conversely, files with decom
pression rates below 128 Kbps will not be played properly.
- Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the rate of
compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps. Conversely, files with decompression
rates below 64Kbps or over 192Kbps will not be played prop
erly.
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying. These files are of the follow
ing types:Windows Media TM (registered trade mark of
Inc) and SDMI TM (registered trade mark of The
Microsoft
SDMIFoundation). You --cannot copy such files.
- Important:
The above recommendations cannot be taken as a guaran
tee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that cer
tain technologies and methods for MP3 file recording on CD-
Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
- This unit can play a maximum of 500 files and 500 folders
per disc.
MPEG4 Playback
MPEG4 Play Function
AVI files are used to contain the audio and video data. Only
AVI format files with the ".avi" extensions can be played.
1. Open the disc tray. Place the disc on the tray.
Close the tray.
2. Press the π/† buttons to select an avi file
(DivX/XviD) and then press ENTER button.
Repeat playback
Press the REPEAT button to change playback mode. There are
3 modes, such as Off, Folder, Track .
- Folder : repeats the AVI files which have the same extension
in the current folder.
- Track: Repeats the current song file.
MPEG4 Function Description
Function Description
During play, press the
Skip
button, it moves forward
( or )
or backward 5 minutes.
During play, press the SEARCH
( or ) button and press
Search again to search at a faster
( or ) speed. Allows you to search
at a faster speed in an AVI
file. (2X, 4X, 8X)
Allows you to search at a
Slow Motion slower speed in an AVI file.
Play (1/2X, 1/4X, 1/8X)
2X/4X/2X/Normal in order
ZOOM
- These functions may not work depending on MPEG4
file.
Stop Off
Reference page
or
-
-
P 14
P 19
English _21