Publicidad
Idiomas disponibles
Idiomas disponibles
7. Insert both filter elements in the
guides.
8. Fit the waste bin.
8.3 Eliminating blockage
Danger of injury!
• Wear sturdy gloves in order to avoid
cut injuries, e.g. due to glass shards,
metal or other sharp-edged materials.
1. Remove wound-up material
(e.g. threads, string...) from brushes and
axles.
2. Remove any jammed material
(e.g. stones, branches, ...).
9 REACH
REACH is the European chemicals regulation for registration, evaluation, authorisation
and restriction of chemicals.
Information on compliance with the REACH regulation (EU) No. 1907/2006 can be
found at www.ipcworldwide.com
50
8.4 Straightening bristles
Danger of fire!
• Do not use naked flames or burners to
heat the bristles.
• Do not use a heat gun. The brushes
may melt due to the excessively hot air.
NOTE
Bent bristles can be straightened again
by heating with a hot-air blower.
Heat the bristles using a hot-air
blower (e.g. hair dryer). The bristles will
straighten themselves.
Publicidad
