MotionBlinds CM-08 Guia De Instalacion página 20

Top-down/bottom-up (bottom rail)
1
Top-down/bottom-up blinds are powered by two motors: one for the bottom rail and one for
the middle rail. The motors need to be programmed individually: first
the bottom rail motor and then the middle rail motor.
Pair the bottom rail motor to an empty channel on the remote. (see step 1)
.1
20
Centre
Check the direction of rotation of the bottom rail (see step 2) and move the bottom rail to the desired
.2
top position. Simultaneously hold the centre and the down button on the remote until the blind stops
stepping and starts stepping again. The top position has been saved
Move the bottom rail to the desired bottom position. Program the bottom position of the bottom bar.
.3
Simultaneously hold the centre and the up button on the remote until the blind stops stepping and
starts stepping again. The bottom position has been saved
Down
Up
Centre