Klarstein WONDERWALL AIR 36 Manual Del Usuario página 18

Idiomas disponibles

Button [OK]

• Press [OK].

• Choose the 1,2,3,4 slot. Press [OK] to turn on/off the slot.

• Under programming or setting status, press the OK button to confirm and proceed

to next step.

Button [+] and [-]

• Choose the program slots.

• Press button increase or decrease, the digit in programming and setting mode, press

and hold [-] or [+] to fast increase/decrease.

Pair to control box

1. Press and hold [+] and [-] simultaneously to start pairing. The CONNECT icon will

blink on the display to indicate that the remote is attempting to connect to the unit.

2. Turn on the heater at the side switch. The unit will now be in pairing mode for 60

seconds.

3. Wait until the CONNECT symbol stops flashing and lights up permanently in the

display. The remote control is now connected to the heater.

Note: The remote control only works within a radius of 10 meters from the unit.

Establishing the connection usually takes 5 seconds.

10034231