Black and Decker BCD6W Manual De Instrucciones página 14

ENGLISH
SET UP & USE
RINSE AID DISPENSER
The rinse aid is released during the final rinse to prevent water from forming droplets
that can leave spots and streaks on your dishes. It also improves drying by allowing
water to sheathe off the dishes. Your dishwasher is designed to use liquid rinse aids.
The rinse aid dispenser is located inside the door next to the detergent dispenser. To
fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level
indicator turns completely black. The volume of the rinse aid container is about 110ml.
FUNCTION OF RINSE AID
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and
spot and streak free drying.
ATTENTION!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with
any other substances. (e.g. Dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
WHEN TO REFILL THE RINSE AID DISPENSER
Add rinse aid into the dispenser, when the rinse aid symbol
LED Display.
1. To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2. Pour the rinse aid into the dispenser, being careful not to overfill.
3. Replace the cap by inserting it aligned with "open" arrow and turning it to the
closed (right) arrow.
NOTE: Clean up any rinse aid spilled during filling with an absorbent cloth to avoid
excessive foaming during the next wash. Do not forget to replace the cap
before you close dishwasher door.
Page 14
is illuminated on the