8. Hot lamination: do not laminate in this mode any materials that are sensitive to
heat with this machine, like thermo-fax paper for example. These materials are
only suitable for cold lamination.
9. Do not pour or spill any liquid into the machine or onto it.
10. Do not insert any metal objects into the machine. Avoid touching the media feed
opening with hands, clothing or hair.
11. The laminating machine is unsuitable for constant use commercially. It is
recommended to switch „O" the machine for 30 minutes, after it has been
operating for a period of approximately 30 minutes.
12. The socket should be near the device and easily accessible.
13. Unplug this equipment when not in use for an extended period of time.
14. Do not oil or sharpen the blades of the trimmer and corner cutter. Never take hold
of the blades.
WARNING: Hazardous moving part is in this equipment, keep body parts
away from moving parts.
Useful Instructions and Tips
The following instructions and tips help you achieve an optimal cut every time and
avoid damaging the trimmer.
Please read the following information thoroughly and observe the instructions
and information contained when operating the device.
Always use both hands to operate the device.
Keep loose clothing, ties, jewellery, long hair and other loose objects away
from the device.
Remove any staples and/or paper clips from the document before starting to
cut it.
The following instructions and tips help you achieve an optimal cut every time and
avoid damaging the corner cutter.
Please read the following information thoroughly and observe the instructions
and information contained when operating the device.
Keep loose clothing, ties, jewellery, long hair and other loose objects away
from the device.
Remove any staples and/or paper clips from the document before starting to
cut it.
10