VONROC AF501AC Traducción Del Manual Original página 6

EN
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
2. MACHINE INFORMATION
Intended use
The Air fan is intended for indoor, non-commercial,
household use for cooling residential rooms. Do not
use the product for any other purpose. The tower
fan can be used in enclosed of open rooms in
a free standing position. The tower fan may only be
used completely mounted and standing vertically
on a stable surface.
TECHNICAL SPECIFICATIONS
Model No.
Power supply
Frequency
Power rating
Timer
Protection class
Length of cord
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
Fig. A (Table fan / Tower fan)
1. Front cover
2. Control panel
3. Back cover
4. Base
5. Column
Fig. B (Control panel)
1. Timer
2. Swing
3. On/off
4. Mode
5. Speed
Fig. C (Remote control)
1. Timer
2. Swing
3. On/off
6
AF501AC / AF501AC_WHITE
AF502AC / AF502AC_WHITE
AF503AC / AF503AC_WHITE
220-240V~
50-60Hz
50W
12 hours
Class ll
1.6 m
4. Mode
5. Speed
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Assembling air fans AF502AC, AF502AC_WHITE,
AF503AC and AF503AC_WHITE (Fig. A)
• Take out the pedestal base (4), steel column (5)
and fan head (3).
• Taking off the screw stem from the lower steel
column clockwise and unscrew the screw stem
on the upper steel column.
• Install the steel column (5) into the hole in the
pedestal base (4) and fasten the screw stem.
• Mounting the upper steel column (5) into the
fan head (3) and fasten the screw stem.
Note: When installing the base, place the fan
upside down on the packaging foam or other soft
surface for avoid scratching.
For AF503AC, AF503AC_WHITE, connect the short
steel column and the long column with the screw
nut before fix it to the base.
Remote control
• Remove the insulating layer before inserting
battery (Fig. D).
• Install a 3V CR2025 battery. We recommend the
use of Lithium type battery for longer use (Fig. E).
Note: Please follow battery disposal instruction on
battery packaging, or contact your local councils
for safely disposal of batteries.
4. OPERATION
Check the device for damage before use
and only use in good working condition.
Starting the tower fan
• Plug in the cable to the mains power outlet.
Product is in standby modus.
Function of the control panel (Fig. B)
• Push the "ON/OFF" button (3) to working state,
push it again to turn it off.
WWW.VONROC.COM