Velleman DVR16H2 Guía Rápida página 18

From Android Mobile Device
In the address book, switch Guard from OFF to ON.
Set flow counting – virtual fence – one-way pass
13.
Note: Before using the IVS function, make sure that event recording is enabled on your DVR.
Intelligent Video Surveillance (IVS) is the advanced application for motion detection, but more precise and
smarter. It can be applied to different situations with one of the following three modes: FLOW COUNTING,
VIRTUAL FENCE or ONE WAY.
On the DVR, right-click to show the main menu, and select
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
CAMERA: Select the camera channel that you want to use with the IVS function.
IVS MODE: Select one of the following three modes depending on your environment:
Mode Description
A virtual detection line is set to detect the moving direction of pedestrians for flow
FLOW COUNTING
counting.
A virtual detection line is set to detect intruders crossing the detection line, and an
VIRTUAL FENCE
alarm will be triggered.
A virtual detection line is set to detect intruders from the specified direction, and an
ONE WAY
alarm will be triggered.
DISPLAY LINE: Select to display the detection line for IVS on the screen or not.
SENSITIVITY: Set the sensitivity for IVS from 00-15. The larger the value, the more sensitive the IVS
will be.
RESET COUNT: Click SUBMIT to reset the flow counting number to 0 when the IVS mode is set to FLOW
COUNTING and activated.
V. 01 – 28/03/2013
DVR16H2
ADVANCED CONFIG
IVS1 IVS2 IVS3 IVS4
CAMERA
IVS MODE
DISPLAY LINE
SENSITIVITY
RESET COUNT
VIRTUAL FENCE AREA
SCENE CHANGE
SCENE CHANGE LEVEL
18
(ADVANCED CONFIG) > IVS.
CH3
FLOW COUNTING
OFF
07
SUBMIT
SETUP
OFF
MIDDLE





©Velleman nv