Panacom PA-7520 Manual Del Usuario página 4

FEATURES
• FLASH function
When there is an engaged tone or a wrong number, you can press
FLASH button to hang up and dial another number.
• REDIAL function
Pick up the handset and then press REDIAL key to dial out the last
dialed number automatically.
• PAUSE function
During dialing, you can press pause key to make the next number
has a 3.6seconds delay to active addition function when using under
certain public telephone exchanger or PABX.
• MUTE function
When you are in conversation, but you don`t want the other side hear
you, you can press MUTE and hold it. The function will be off when
you release it.
• HOLD function
When you are in conversation you can press HOLD, the other side
will hear music playing. You can put down the handset back to the
base unit. The music will be off when you pick up the handset back
again.
• One Touch Memories (M1-M2-M3)
Store:
Pick up the handset and press STORE button, you will hear a "beep"
sound Then dial the number and press any memory button (M1-M2-
M3) to save it.
To save the next number press FLASH button and repeat the steps.
NOTE:
The numbers will lose if there is no line power or unplug the telecom
line for some minutes.
Make calls from memory button:
Pick up the handset and press the memory button (M1-M2-M3) to
dial out the number.
• DIALING MODE
Before the phone is put in service, you can turn the dialing mode
switch to Pulse (P) or Tone (T) position to be set in accordance with
the dialing method used by your local public telephone exchanger:
NOTE:
Pg. 4