Introduction to the operating
instructions
Availability
A complete and legible copy of the operating
instructions must always be stored at the calibration
and adjustment facility's operating location.
If these operating instructions become lost or
unusable, a new copy can be requested from
EDUARD WILLE GmbH & Co. KG.
If you have not yet registered the device, the
following data are required for reordering:
• Serial number of your calibration and adjustment
facility
• Name of your dealer
• The code number of the operating instructions
can be found at the bottom left of the title page.
In addition to the operating instructions, the
generally applicable and local accident prevention
and environmental protection regulations must be
made available and observed.
Keep all safety notices and information on dangers
on the calibration and adjustment facility in legible
condition.
Additions
Regularly add instructions to the operating
instructions at the relevant operating location due to
• Legal regulations concerning accident prevention,
• Legal regulations concerning environmental
protection and
• Trade association stipulations.
Introduction to the operating instructions
Structural features
Defined structural features are assigned to the
various elements within the operating instructions.
You can therefore easily determine the type of text
which this involves:
Normal text,
• Lists or
Action steps.
Notices with this symbol contain general
information and information regarding the
economical use of the testing facility.
Explanation of the safety instructions
The following categories of notices are contained in
these operating instructions:
DANGER
Notices containing the word DANGER
warn of hazards which lead directly to
severe or fatal injuries.
WARNING
Notices containing the word
WARNING warn of hazards which may
possibly lead to severe or fatal injuries.
CAUTION
Notices containing the word CAUTION
warn of hazards which may possibly
lead to minor to moderate injuries.
5