Publicidad
Idiomas disponibles
Idiomas disponibles
Warranty and liability
Warranty and liability claims in the event of personal
injury and material damage are inadmissible if they
are attributable to one or more of the following
causes:
• Improper use of the calibration and adjustment
facility.
• Improper installation, commissioning, operation
and maintenance of the calibration and
adjustment facility.
• Operation of the calibration and adjustment facility
with defective safety facilities or improperly
installed or non-functional safety and protective
devices.
• Non-observance of the notes in the operating
instructions.
• Unauthorised modification of the calibration and
adjustment facility's characteristics.
• Inadequate monitoring of parts of the calibration
and adjustment facility which are subject to wear.
• Improperly carried out repairs.
• Disasters due to the effect of foreign bodies and
acts of God.
• Non-observance of the requirements contained in
the relevant standard during calibration.
• Non-observance of the manufacturer's
instructions on calibrating and adjusting
calibration objects.
Changes to the design of the calibration
and adjustment facility
• Do not carry out any modifications, attachments
or conversions on the calibration and adjustment
facility without the approval of the manufacturer.
• All conversion measures require written approval
from EDUARD WILLE GmbH & Co. KG
• Immediately exchange parts of the machine which
are not in flawless condition.
• Use only genuine replacement and wearing parts.
Parts procured from third-party manufacturers
provide no guarantee of the fact that they have
been designed and manufactured to cope with the
stress and function safely.
Duties when handling this calibration
and adjustment facility
Obligations on the part of the owner
The owner is obliged only to allow the following
persons to work on the calibration and adjustment
facility:
• Persons who are familiar with the basic
regulations concerning industrial safety and
accident prevention, and who have been trained
in handling the calibration and adjustment facility,
• Persons who have read and understood the
chapter on safety and the warning notices
contained in the operating instructions, and have
confirmed this with their signature,
• Persons who are familiar with and have
understood the requirements for calibrating torque
wrenches.
Responsibility for the properly executed calibration
and adjustment of torque wrenches is borne by the
owner or user.
Safety
7
Publicidad
