Stahlwille perfectControl 7794-1 Manual De Instrucciones página 47

Using the TORKMASTER 4 programme
Using the TORKMASTER 4
programme
Installing the software
Installing the TORKMASTER 4 programme
The following system requirements must be met to
install the TORKMASTER 4 programme on your
computer:
• Operating system
− Windows® XP SP3 or
− Windows® Vista or
− Windows® 7
• Adobe Acrobat Reader® 8.0 or higher
• Free USB interface.
The programme is installed with the aid of an
installation assistant. This conducts you through the
installation. To install the programme, you must
have administrator rights on the computer. The
steps required for installation are described in the
following.
Connect the enclosed USB stick to the computer.
Connect the calibration and adjustment facility to
the computer using the enclosed 3.5 mm jack
plug cable.
16
The following query is displayed:
To start installation, confirm the query with
"Execute".
The language selection is displayed on the monitor.
Select the desired language.
Click onto "OK" to confirm the selection.
The installation start window is displayed