Publicidad
Idiomas disponibles
Idiomas disponibles
Plantillas de Vitrocerámica
6.Timer adjustment
• If you want to cancel the timing, you can adjust the timing time to zero.
• The first time you press the plus button "
minute, after which you can press the plus or minus button to adjust
the timing time.
• Press the plus button "
the heating time will be increased by 1 minute. The timing will be
continuously changed between 1-99 minutes. The maximum adjustment
to 99 minutes.
• Press the minus button "
and the timing will be reduced by 1 minute. When the timing time is less
than or equal to 30 minutes, the continuous adjustment timing will
continuously change between 30-0 minutes; If the timing has been
adjusted by the plus button "
minus button "
timing continuously between 30-0 by the minus button.
• After the timer countdown is 0, the buzzer will continue to sound for 2
minutes, and you can press any button to turn off the beep.
Note:
1. If the timing of a certain cooking zone has been set, to change the time,
press the time button again to select the corresponding cooking zone, and
then enter the new time by plus and minus buttons.
2. After the cooking zone is selected, the timing setting cannot be made
before the cooking zone power is set, and the time button is invalid.
3. When the timing of a certain cooking zone is set for the first time, if the
cooking zone selection button corresponding to the cooking zone is pressed
when the timing is not confirmed, the timing of the cooking zone is
cancelled.
4. When single or multiple cooking zones are working, the decimal point " "
of the corresponding cooking zone is always displayed during the timing
setting process.
When multiple cooking zones are working, if two or more cooking zones
have been set the time, the timing digital tube displays the minimum
After selecting the corresponding power of the cooking
zone, press the time button "
will display "00" and the decimal point on the right will
display " ".
At this time, the timing mode is entered, and the timing
time of the selected burner can be set. The following
operations are required in "In timing mode".
" for each time, the buzzer will beep once, and
" for each time, the buzzer will beep once,
" for more than 30 minutes, press the
" to adjust the timing to 0, and continue to change the
www.derkochline.com
Ceramic Hob
", the timer digital tube
", the timing starts from 1
34
Publicidad
