Epson TM-S1000 Manual Del Usuario página 11

place it over the power switch. When turning on or off of the switch is required,
insert a pointed object into one of the holes of the cover, and press the switch.
When the scanner is stored or not in use for an extended period, turn off the
power switch and disconnect the power cord.
Downloading Drivers, Utilities, and Manuals
The latest versions of drivers, utilities, and manuals can be downloaded
from one of the following URLs.
For customers in North America, go to the following web site:
http://www.epsonexpert.com/
For customers in other countries, go to the following web site:
http://download.epson-biz.com/?service=pos
Connecting the Scanner to the Host Computer
Follow these steps to connect the scanner to a host computer.
1. Confirm that the scanner is not connected to the host computer.
2. Install the TM-S1000 driver.
Note:
If the scanner is connected to a host computer before the driver is installed,
the Found New Hardware Wizard will be displayed. In that case, cancel the
wizard and install the driver.
3. After installing the driver, connect the scanner to the host computer
via the USB cable.
TM-S1000 User's Manual 7