Eclipse Magnetics Ultralift E Serie Manual De Operación página 5

2 Operation and Safety Instructions
2.1 Symbols and Terms Used
SYMBOLS
The Working Load Limit (formerly Safe Working Load, SWL) (flat plate)
WLL
1000kg
≥45mm
(2200lb)
(≥1.77")
The Working Load Limit (formerly Safe Working Load, SWL) (round bar)
WLL
1000kg
≥45mm
(2200lb)
(≥1.77")
Correct orientation of load
= =
Do not lift people
Do not lift load over people
Do not lift loads exceeding the recommended length
Air gap warning (See Load Characteristics in Section 4)
TERMS
Poles
The two parallel mild steel surfaces on the base of the lifter.
Air-gap Any non-ferrous material that prevents the poles contacting the load.
Paint, rust, scale or even an uneven surface can constitute an air-gap.
Eclipse Magnetics. Innovative Magnetic Solutions
3